ChamSys MagicQ User Manual - Manual (Page 284)

MagicQ User Manual 255 / 355
Time code can be triggered from an external time code source using the MagicQ MIDI/Timecode module, or it can run from the
internal time code source. To control a Cue Stack using external time code set the “External time code” option in the Cue Stack
options.
Cues can be set to time code by changing the Halt field in the Cue Stack window (double click on it or press SHIFT + ENTER.
When a Cue Stack that contains time code cues is activated the time code takes control of the Cue Stack and each Cue executes
at the time code specified. For Internally generated time code, activating the Cue Stack starts the time code at 0/0/0. For external
time code the time code will be read from the external module.