ChamSys MagicQ User Manual - Manual (Page 219)

MagicQ User Manual 190 / 355
23.3 Configuring MagicQ to retrive thumbnails
In the Setup Window, Media View configure the media server parameters. If you have patched using the Choose Media Server
method above then the parameters should mostly be set up correctly for you. It is only neccesary to enter the IP address of the
media server.
Set the IP address of the media server. This will be used to locate the media server on the network and to retrieve thumbnails and
live previews. Move to the IP address field and set the IP address. If you have only one media server active on the network then
pressing enter should detect its IP address automatically. Note that the media server will respond to commands over Art-Net,
Pathport or ACN regardless of whether the IP address of the Media Server is set up correctly in MagicQ.
To determine the IP address of media server on Windows XP machines, load the Control Panel, and open the Network Connec-
tions screen. Double click on the network connection, choose the support tab, and the IP Address is displayed.