ChamSys MagicQ User Manual User Manual
Page 377
MagicQ User Manual
348 / 355
Used to
and other
. Also used to
such as parameters.
Shift and Set is used for selecting icons.
Record
An
button for recording show data.
Used to
and to
, and to
See also
Shift and Record is used to record but with additional record options.
Remove
An
for removing show data.
Used to
remove Cue Stacks from Playbacks
, and to
Undo
The Undo button allows the last few changes in the programmer to be undone. Press SHIFT and Undo to redo a change. The
Undo functionality is enable in the Setup Window, Settings View.
In order to keep MagicQ simple the Undo button does not undo patch, record, set, move, copy or any other actions. If a major
mistake is made then you can restore to a previous version of the show file using the <_backup_archives,Backup Archives>>
feature.
Include
An
for including previously programmed show data back into the programmer.
Used to edit Cues. See
Shift and Include is used to include but with a additional options.
Update
Used as part of the edit process to update a Cue that has been included into the programmer. See
Copy
An
for copying show data.
Used to
copy Cue Stacks between Playbacks
, and to
Shift and Copy is used to perform linked/unlinked copies - the default depends upon the option Setup, View Settings, Copy
Unlinked.
Move
An
for moving show data.
Used to
move Cue Stacks between Playbacks
, and to
Go
Used to activate a playback. Also used to start the next step in a Cue Stack when the step has been programmed to halt, or after
the user has pressed the Pause button.
See
Pause
Used to pause the execution of a Cue Stack.
See
S
Used to make the playback the
. This enables the Cue Stack on the Playback to be viewed in the Cue Stack
Window and the current Cue in that Cue Stack to be viewed in the Cue Window.