ChamSys MagicQ User Manual - Manual (Page 366)

MagicQ User Manual 337 / 355
Table 46.12: (continued)
Remove Cue ID 2.5 REM 2.5 S
Copy Playback COPY <source S> <dest S>
Copy Playback unlinked <SHIFT + COPY> <Unlinked> <source S> <dest S>
Table 46.13: Palettes
Record Palette Select heads, REC, select item
Re-record Palette Select heads, REC, select item
Name Palette Type name, SET
Name Palette (no keyboard) SET SET, type name, sel item
Edit Palette Select heads, INC, select item, make changes, UPD
Play Palette with 3 secs 3 select item
Play Palette with 3 secs fanned 3 * select item
Play Palette fan fade 0 to 3s 0 THRU 3 select item
Play fan delay 0 to 3s, 1s fade 0 THRU 3 / 1 select item
Copy Palettes to Playback <SHIFT + cursor> to select Palettes, COPY S
Set icon for a palette SHIFT + SET
Table 46.14: Information Windows
Additional Output Windows 2 OUT 3 OUT 4 OUT
Programmer Info Window CTRL + PROG or 2 PROG
Cue Stack Info Window CTRL + CUE STACK or 2 CUE STACK
Send text message ! delay , duration , ! message
Send text display 5 seconds ! 0 , 5 ! message
Send text stay visible ! message
Table 46.15: Wing / Keypad short cuts
Select position palette <POS + S>
Select colour palette <COLOR + S> Select beam palette <BEAM + S>
Select position palette 4 POS 4 ENTER
Select colour palette 5 COLOR 5 ENTER
Select position 4 time 5 secs POS 4 / 5 ENTER
Select position 4 time 5 secs fan POS 4 / 5 * ENTER
Default intensity attribs <ALL + LOCATE>
Make active intensity attribs <ALL + SET>
Remove intensity attribs <ALL + REMOVE>
Table 46.16: Console
Start up Start button on rear
Shut down SETUP, <QUIT>
Soft reset SETUP, <SHIFT + QUIT>
Calibrate touch screen SETUP, <View Settings> <Cal Touch> or CTRL + SET
Hard reset Hold rear reset button 5 seconds