ChamSys MagicQ User Manual - Manual (Page 286)

MagicQ User Manual 257 / 355
W <enable> Enable / disable time code generation (1 for enable, 0 for disable)
Q <time code> Set current time code (also enables time code generation)
For example to set timecode to 0:0:10:0
Q0,0,10,0
36.7 Timecode Re-transmit
The LTC or MIDI timecode decoded from a MagicQ MIDI/Timecode interface can be retransmitted over the network as Art-Net
timecode.
This can then be received by any MagicQ console on the network even if it does not have a MIDI/SMPTE interface - just set the
timecode input type to ArtNet.
For MagicQ PC/Mac systems the receiving system must have a MagicQ Wing or MagicQ Interface connected - but this does not
have to be MagicQ MIDI/SMPTE interface.