ChamSys MagicQ User Manual - Manual (Page 62)

MagicQ User Manual 33 / 355
Chapter 6
Quick Start
6.1 Starting up MagicQ
On MagicQ consoles hold the power button on the rear panel. On MagicQ PC and Mac click on the MagicQ application icon.
On start up you are presented with an option to load demo shows or to continue the last show. Selecting last show will load and
run the last show used on the system. This option can be hidden for subsequent start ups.
The console remembers all windows that were open when the console was last used. To close all windows press SHIFT and
CLOSE.
Press SETUP to open the Setup Window.
6.2 Calibrating the Touch Screen
On MagicQ consoles if the touch screen does not seem to be responding to your touch correctly then you may need to calibrate
the touch screen.