ChamSys MagicQ User Manual - Manual (Page 135)

MagicQ User Manual 106 / 355
13.4 Movement View
The movement view shows the relative positions of heads in terms of pan and tilt range on a 2D map. It also shows the current
colour of the heads. This enables previewing of FX and relative positions without the lighting rig. Press the VIEW CHANS,
VIEW DMX, VIEW MOVE soft buttons.
13.5 Plan View
Plan View enables 2D plans of the stage rig constructed and viewed. It also enables grids of LED or dimmers to be created for
use with the in-built pixel mapping (Bitmap FX) engine. Press the VIEW PLAN soft button.
13.5.1 Creating rig plans
It is possible to create a rig plan in the Outputs window, so that you can easily identify the levels and colours of your moving
lights based on their position in the lighting rig. The model of the rig in MagicQ consists of a grid - each cell can be assigned to
a particular head number. Grids can also be used to monitor LED arrays and other colour blocks.