ChamSys MagicQ User Manual - Manual (Page 179)

MagicQ User Manual 150 / 355
19.13 Programmer Master
It is possible to make a Playback into a Programmer Master. Record an empty Cue onto a Playback and then set the Cue Stack
option, Function, Programmer Master.
When the Playback is activated by pressing the GO button then the fader level becomes the Programmer level. Releasing the
fader level causes the Programmer level to go back to 100%.
When the fader is less set to less than 100%, the FLASH button can be used to bump in the Programmer at 100%.
The GO button and PAUSE buttons are used to swap Palette values in the Programmer when the Programmer has mixed palette
values.
For instance if some heads are set to use the RED palette in the programmer and others using the GREEN palette then pressing
GO will swap all the heads using RED palette to use GREEN and all the heads using GREEN palette to use RED.
If there are more than 2 colour Palettes in use in the Programmer, then the colours rotate around all the different Palettes.
Odd/Even can be used to easily set up an initial look of 2 or more colour palettes.
Currently only one Programmer Master can be active at a time.