ChamSys MagicQ User Manual - Manual (Page 330)

MagicQ User Manual 301 / 355
42.10.12 Always show Record Options
When this setting is set to Yes, MagicQ always shows a Record Options toolbar when the Record button is pressed. An Include
Options toolbar is shown when Include is pressed.
42.10.13 Force Window on External Monitor
This setting determines how windows are shown on the External Monitor.
It is possible to force a particular Window to be displayed on the External Monitor regardless of other Windows moved onto the
Monitor. Options are “None”, “Outputs Info”, “Programmer Info”, “Cue Stack Info”,”Group” and “Exec”.
There are also options to set the sizing (number of columns) on the external monitors to be the same as on the internal touch
screen. You can choose the additional options “Normal same res” and “Normal 10 cols”. “Normal same res” makes the external
monitor use the same number of rows and columns as when the window is on the internal monitor. “Normal 10 cols”. Makes the
external monitor always use 10 columns regardless of what size the window is.
42.10.14 Plan Intensity type
Setting for how the Plan View in the Outputs Window shows intensities – either using glass fill or colour grading.
42.10.15 Message Window
This specifies where the message box is shown (main screen, external screen 1, external screen 2) and whether a network message
is sent to other consoles.
Setting “Net Only” results in messages only being sent over the network, not shown on the console where the Cue executed.
42.11 Cue Storage Settings
42.11.1 Delete Cues when delete Cue Stacks
With this setting you can force Cues to be deleted when the Cue Stack that uses them is deleted. Cues are only deleted if they are
not used in other Cue Stacks. This option defaults to No.
42.11.2 Delete Cue Stacks on remove Playbacks
With this setting you can force Cue Stacks to be deleted when the Playback is deleted. Cue Stacks are only deleted if they are
not used in other Playbacks. This option defaults to No.
42.11.3 Use first free Cues, Stacks, Palettes
By default MagicQ uses the lowest free Cue when recording new Cues. It also uses the lowest free Cue Stack when recording
new Cue Stacks and lowest free Palette when automatically recording Palettes.
Setting this setting to No, forces MagicQ to record items after the place the last items were recorded – enabling the user to control
where new items are recorded.