Checking ip addresses - ping test, Checking consoles on the network, 2 checking ip addresses - ping test – ChamSys MagicQ User Manual User Manual
Page 244: 3 checking consoles on the network
MagicQ User Manual
215 / 355
Choose "Use the following IP address". Enter the IP address (e.g. 2.0.0.10) and the subnet mask (e.g. 255.0.0.0). The default
gateway address can generally be left blank. Click ok.
28.2
Checking IP addresses - Ping Test
MagicQ includes a ping test for resolving network problems. At the command line type ping followed by the IP address, e.g. to
test network connection to IP address 2.0.0.3
ping 2.0.0.3
There is a short cut for use on the console keypad - enter three dots and then the IP address (no space)
. . . 2.0.0.3
Entering just . . . will ping the last tried IP address.
28.3
Checking consoles on the network
It is possible to check which MagicQ consoles are on the network by going to Setup, View System, View Status and selecting
the Network tab.