ChamSys MagicQ User Manual - Manual (Page 228)

MagicQ User Manual 199 / 355
The Type field is used to indicate whether the channel is Highest Takes Precedence (HTP) or Latest Takes Precedence (LTP).
Generally only Intensity is set to HTP - all other channels are LTP. Note that if a head has combined Dimmer and Strobe channel
then this should be set as Dimmer attribute with type of HTP.
The Attrib No field is used to identify the function of the channel to MagicQ. This is the most important field in the channel list.
Table 24.1: Attrib No field
Attribute Attib No Default Encoder Function
Dimmer 0 I1X Intensity
Dim Mode 1 I1Y Intensity mode
Pan 4 P1X Pan
Tilt 5 P1Y Tilt
Pos1 46 P1A
Pos2 47 P1B
Pos3 48 P1C
Pos4 49 P1D
Pos5 50 P1E
Pos6 Speed 51 P1F Position (Vector) Speed
Col1 6 C1X Col Wheel 1
Col2 7 C1Y Col Wheel 2
Col3 Speed 26 C1B Colour (Vector) Speed
Col4 27 C1E Colour/White
Cyan 16 C1A Cyan/Red
Magenta 17 C1B Magenta/Green
Yellow 18 C1C Yellow/Blue
Col Mix 19 C1D Col Mix/Amber
Shutter 1 B1A Shutter/Strobe
Iris 3 B1B Iris
Focus 12 B1C Focus
Zoom 13 B1D Zoom
Frost1 32 B2A First Frost attribute
Frost2 33 B2B Second Frost attribute
Gobo1 8 B1X Gobo wheel 1
Gobo2 9 B1Y Gobo wheel 2
Gobo3 28 B2X Gobo wheel 3
Gobo4 29 B2Y Gobo wheel 4
Rotate1 10 B1F Gobo rotate 1
Rotate2 11 B1E Gobo rotate 2
Rotate3 30 B2F Gobo rotate 3
Prism Rot 31 B2E Prism rotate
FX1 Prism 14 B2C Prism
FX2 15 B2D
FX3 34 B3C
FX4 35 B3D
FX5 36 B3X
FX6 37 B3Y
FX7 38 B3F
FX8 39 B3E
Macro 22 B3A
Macro2 33 B3B
Cont1 20 B4A Lamp on/off
Cont2 21 B4B Reset
Cont3 (Bm Speed) 40 B4C Beam (Vector) Speed
Cont4 41 B4D
Cont5 42 B4X
Cont6 43 B4Y