ChamSys MagicQ User Manual - Manual (Page 224)

MagicQ User Manual 195 / 355
Chapter 24
Head Editor
The Head Editor is accessed from the Edit Head soft button in the Patch Window. Making changes modifies the head files stored
on the MaqicQ disc and used for all new shows.
The Head Editor consists of 5 views for modifying data:
• General
• Channels
• Ranges
• Palettes
• Macros
In each of the views new values can be entered using the keypad or keyboard. New entries can be added to the lists by pressing
the Insert soft button. The top right encoder wheel can be used to modify the item where the cursor is placed.
The Head Editor will start up with the chosen head - i.e. the last head you chose for patching. If you have not yet chosen a head
then the Head Editor will be empty.
You can choose the head to edit from within the Head Editor by pressing the Choose Head button. This has the same effect as
the Choose Head button in the Patch Window - i.e. you are presented with a list of heads to choose from.
Once you have made modifications to the head you can save the changes to disc by pressing the SAVE HEAD soft button.
If you wish to create a new head from scratch you can press the New Head soft button, whilst if you wish to copy an existing
head you can use the Save As soft button.
At any time you can choose a new head - however if you have made changes, which you have not saved to disc, then you will
be prompted whether you really wish to continue. Continuing will mean that the changes will be lost unless you already have
patched heads of that type - in which case the patched heads in the show will keep the changes. In either case, the head file on
the disc will not keep the changes.
Press the Patch button to leave the Head Editor and return to the Patch Window.
24.1 How Heads are stored in MagicQ
MagicQ stores heads in the show/heads folder. When you choose a head to use in a show it loads the head from the disc and
stores it in memory. When you save your show, MagicQ writes a copy of the head into the show file, ensuring that your show
will work even if it is loaded onto a console which does not have the head files for your chosen heads installed.
If you load an old show into MagicQ then the heads in use on the show will be the ones recorded into the show file, not the heads
in the show/heads folder on the MagicQ console. From the Patch Window, if you choose the head again, edit the head, or patch
new heads of the same head type it will always use the head stored in the show file – this ensures consistency.