ChamSys MagicQ User Manual - Manual (Page 150)

MagicQ User Manual 121 / 355
MagicQ will rotate around the heads from the existing Cue to provide data for the new heads - for example if the old Cue Stack
had 4 heads and 8 heads are selected then heads 1 and 5 from the selection will both use data from the first head in the old Cue
Stack.
This option will work on Cue Stacks containing multiple head types, but the best conversion will occur when copying from one
set of heads to another set of heads. In some situations it may be preferable to do a selective copy of the original Cue Stack to
heads of only one type and then to use the COPY TO SEL option on that new Cue Stack.
The Cues in Cue Stacks created using COPY TO SEL will always be unlinked.