ChamSys MagicQ User Manual - Manual (Page 91)

MagicQ User Manual 62 / 355
Chapter 8
Setting Intensity levels
The intensity level of heads (including dimmers) are controlled from the Intensity Window. Press the INT button to open the
window.
8.1 Using the on screen faders
This window displays a fader for each head (including dimmers) patched onto the console. Pressing the slider part of the fader
sets the appropriate level. When a fader is moved from 0 the channel in the programmer is activated – and the fader will turn red.
The SQUARE OFF soft button enables fast programming of intensities. Using the touch screen select the channels you wish to
have at full and at zero – but don’t bother being exactly accurate with the level of the selection. Pressing SQUARE OFF finishes
the job by setting all channels that are less than 50% to 0 whilst setting channels above 50% to full.
Use the ALL TO FULL and ALL TO ZERO buttons to change the level of all the channels.
Press SHIFT and SQUARE OFF to invert the faders - all channels less than 50% go to 100% whilst all channels above 50% go
to 0%.
Press the CLEAR soft button to clear the programmer.