ChamSys MagicQ User Manual - Manual (Page 308)

MagicQ User Manual 279 / 355
Chapter 42
Settings
MagicQ supports a large number of settings that the user is free to change. These settings are divided into two categories – show
settings and console settings. Show settings are settings that the user may wish to change on a show by show basis, whereas
console settings are associated with the specific console and its connectivity to external devices.
S HOW S ETTINGS
• Mode Settings (not Product & Country)
• Keypad & Encoder Settings
• Windows Settings
• Programming Settings
• Playback Settings
• Cue Stack Settings
• Cue Storage Settings
• Media Server Settings
C ONSOLE S ETTINGS
• DMX I/O Settings
• Wing Settings
• Monitor Settings
• Mode Settings (Product and Country)
• Network Settings
• MIDI/SMPTE Settings
• Port Settings
• Multi Console Settings
• Hardware Settings
Both show settings and console settings are stored in MagicQ show files, but by default only show settings are loaded when a
MagicQ show is loaded. To force consoles settings to be loaded as well use SHIFT and LOAD SHOW+CON.