IDK MSD-54 Series - Manual (Page 116)

MSD-54 SERIES User’s Guide
116
8.7.9 The number of HDCP retries [HDCP ERROR RETRY]
If a display device with HDCP is connected and you set “8.7.8 HDCP output mode” to “HDCP INPUT ONLY”
or “ALWAYS”, HDCP is authorized regardless of the status of input signals. Normally, set “HDCP ERROR
RETRY” to “ETERNITY” to retry the authorization automatically after the first authorization fails. However, if
you do not input signals protected by HDCP, you can set the number of retries arbitrarily. (If retry is not
succeeded even after the MSD retries for the set number of retry times, video and audio with HDCP are not
output.)
･Retry until succeeded: ETERNITY [Default]
･Not retry: 0
･Retry for the set number of retry times: 1 to 100
1. To set the number of HDCP retries using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
OUTPUT SETTING
▲▼keys: Select “OUTPUT SETTING”.
↓ SET key
[OUTPUT SETTING]
HDCP ERROR RETRY
▲▼keys: Select “HDCP ERROR RETRY”.
↓ SET key
[OUT1 HDCP RETRY]
E TERNITY
▲▼keys: Set the number of HDCP retries for when HDCP
authorization failed.
◄►keys: Select the desired output (OUT1 to OUT4).
↓ SET key
[HDCP ERROR RETRY]
NOW UPDATE... Displays the message for 1 second before automatically returning to
the previous screen.
↓
[OUTPUT SETTING]
HDCP ERROR RETRY
Note:
If you do not press the “SET” key, the number of retries is not changed. Make sure to press the “SET” key.
2. To set the number of HDCP retries using commands:
@SHR: Set the number of HDCP retries
@GHR: Get the number of HDCP retries
For each output