IDK MSD-54 Series - Manual (Page 175)

175
8.12.3 Command link [COMMAND LINK]
The MSD has 98 command execution conditions as shown below. If these execution conditions are met,
control commands which are associated beforehand will be executed. One execution condition can be
associated to up to 10 commands. If several commands are associated, commands are executed in order of
registration. If the same command is associated several times, it is repeatedly executed.
[Table 8.20] Execution condition of control commands
Execution condition Function Execution condition Function
COMMANDs A to I
Control command
execution key
VIDEO:OUT2-IN1
to
VIDEO:OUT2-IN9
Selecting video input
channel of OUT2
POWER ON
Controlling power
switch
VIDEO:OUT2-OFF
DISPLAY1 POWER
ON Controlling display
device power of OUT1
AUDIO:OUT2-IN1
to
AUDIO:OUT2-IN9
Selecting audio input
channel of OUT2
DISPLAY1 POWER
OFF
DISPLAY2 POWER
ON Controlling display
device power of OUT2 DISPLAY2 POWER
OFF
AUDIO:OUT2-OFF
DISPLAY3 POWER
ON Controlling display
device power of OUT3
VIDEO:OUT3-IN1
to
VIDEO:OUT3-IN9
Selecting video input
channel of OUT3
DISPLAY3 POWER
OFF
DISPLAY4 POWER
ON Controlling display
device power of OUT4 DISPLAY4 POWER
OFF
VIDEO:OUT3-OFF
VIDEO:OUT1-IN1
to
VIDEO:OUT1-IN9
Selecting video input
channel of OUT1
AUDIO:OUT3-IN1
to
AUDIO:OUT3-IN9
Selecting audio input
channel of OUT3
VIDEO:OUT1-OFF AUDIO:OUT3-OFF
AUDIO:OUT1-IN1
Selecting audio input
channel of OUT1
VIDEO:OUT4-IN1
to
VIDEO:OUT4-IN9
Selecting video input
channel of OUT4
to
AUDIO:OUT1-IN9
AUDIO:OUT1-OFF VIDEO:OUT4-OFF
AUDIO:OUT4-IN1
to
AUDIO:OUT4-IN9
Selecting audio input
channel of OUT4
AUDIO:OUT4-OFF
Those functions can be controlled not only by pressing the front panel keys but also using parallel input or
communication commands.
For association, select control commands registered in “8.12.1 Control commands“ (COMMAND 1 to 32). If
you do not want to execute any commands, select “OFF”. All execution conditions are set to “OFF” by default.