IDK MSD-54 Series - Manual (Page 177)

177
[Figure 8.56] Example of toggle operation of control command execution key
1. To associate the control command using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
PRESET COMMAND
▲▼keys: Select “PRESET COMMAND”.
↓ SET key
[PRESET COMMAND]
COMMAND LINK
▲▼keys: Select “COMMAND LINK”.
↓ SET key
[COMMAND LINK]
C OMMAND A
▲▼keys: Select the execution condition (COMMAND A to
AUDIO:OUT4-OFF).
↓ SET key ↑ ESC key: Cancels the setting and returns to menu.
[COMMAND A]
TOGGLE:
O FF
▲▼keys: Set the toggle operation (OFF, ON).
Settable only if you select any of COMMAND A to I for the execution
condition.
↓ ◄►keys
[COMMAND A]
STARTUP:
A UTO
▲▼keys: Select the plane you want to execute at starting up (AUTO,
A, B)
Settable only if you set ”TOGGLE” to “ON”.
↓ ◄►keys
[COMMAND A]
1st:
O FF
▲▼keys: Set the 1 st
command (OFF, COMMAND 1 to COMMAND
32).
If you set “TOGGLE” to “OFF”, this screen is for “PLANE A”.
↓ ◄►keys
[COMMAND A]
2nd:
O FF
▲▼keys: Set the 2 nd
command (OFF, COMMAND 1 to COMMAND
32).
If you set “TOGGLE” to “OFF”, this screen is for “PLANE A”.
↓
◄►keys
[COMMAND A]
10th:
O FF
▲▼keys: Set the 10 th
command (OFF, COMMAND 1 ~ COMMAND
32)
If you set “TOGGLE” to “OFF”, this screen is for “PLANE A”.
↓ ◄►keys
1
2
3
4
5
30
31
32
Control command
Execution
order
Associating
commands
COMMANDs 1 to 32
PLANE B PLANE A
1st
2nd
3rd
4th
5th
6th
7th
8th
9th
10th
COMMAND A
COMMAND 3 COMMAND 4
@SAM,1,1 CR LF
@SAM,1,0 CR LF
Turning on
[Association to COMMAND A] [Execution of COMMAND A]
Operating COMMAND A key
Sending COMMAND 3 (Audio output mute of OUT1 ON)
Sending COMMAND 4 (Audio output mute of OUT1 OFF)
Operating COMMAND A key
PLANE A is executed
PLANE B is executed
LED of front and TALLY blinks
LED of front and TALLY are lighten