IDK MSD-54 Series - Manual (Page 134)

MSD-54 SERIES User’s Guide
134
“OUTn MONITOR” is set for any input and no display device is connected to that selected connector or if
loading its EDID fails, an error message is displayed for a second when the VFD screen moves from the sub
menu to the setup menu.
OUTPUT MONITOR
UNCONNECTED OUTPUT MONITOR
EDID READ ERROR
If EDID cannot be updated pressing the “SET” key, the same message is displayed for a second as well.
If the error message is displayed, check the connection of the display device. If EDID can be loaded, EDID will
be updated automatically.
2. To set the EDID using commands:
@SED: Set EDID
@GED: Get EDID