IDK MSD-54 Series - Manual (Page 191)

191
8.13.6 Startup setting [STARTUP]
･Cross point memories: CROSS POINT1 to 9
Starts up with the channel settings saved in the selected cross point memory. For settings other
than channel settings, starts up with the settings of the last MSD power down.
･CHANNEL OFF
Channel setting will be OFF. For settings other than channel setting, starts up with the settings of
the last MSD power down.
･LAST CHANNEL [Default]
Starts up with the settings of the last MSD power down.
･Preset memory: PRESET MEMORY 1 to 8
Starts up with the settings saved in the preset memory. For settings that are not saved in the
preset memory, it starts up with the settings of the last MSD power down. (For settings that can
be saved in the preset memory, see “8.13.5 Saving all settings”.)
1. To set the startup setting using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
PRESET MEMORY
▲▼keys: Select “PRESET MEMORY”.
↓ SET key
[PRESET MEMORY]
STARTUP
▲▼keys: Select “STARTUP”.
↓ SET key
[STARTUP]
L AST CHANNEL
▲▼keys: Select the setting for startup (CROSS POINT 1 to 9,
CHANNEL OFF, LAST CHANNEL, PRESET MEMORY 1 to 8).
*
↓ ESC key: Returns to the previous screen.
* You cannot select a preset memory whose settings are not saved. Nothing is saved in all preset memories
by factory default.
2. To set the startup setting using commands:
@SMU: Set startup status
@GMU: Get startup status