IDK MSD-54 Series - Manual (Page 142)

MSD-54 SERIES User’s Guide
142
1. To set the speaker configuration using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
EDID
▲▼keys: Select “EDID”.
↓ SET key
[EDID]
SPEAKER
▲▼keys: Select “SPEAKER”.
↓ SET key
[IN1 SPEAKER]
MODE:
A UTO NUMBER:2
▲▼keys: Select the setting mode of IN1 (AUTO, MANUAL).
↓
◄►keys
[IN1 SPEAKER]
MODE:AUTO NUMBER:
2
▲▼keys: Set the number of speakers of IN1 (1 to 8).
When it is changed, the speaker configuration will be set automatically
as shown in [Table 8.9]
↓
[IN1 FL/FR]
O N NUMBER:2
▲▼keys: Set “OFF” or “ON” for the front L/R of IN1.*
Repeat the same procedure for other speakers.
↓ SET key: Applies settings.
[SPEAKER]
NOW UPDATE... The message is displayed for one second and then previous screen is
displayed automatically.
↓
[EDID]
SPEAKER
* The cursor can be moved only if you select “MANUAL”. The number of speakers is displayed on
the right side of the screen.
Note:
If you do not press the “SET” key, the speaker configuration is not changed. Make sure to press the “SET” key
after each change.
If you set the speaker configuration manually and press the “SET” key, the number
of speakers will be set automatically. If the number of speakers exceeds the
available value, the following message is displayed and the settings will not be
applied.
2. To set the speaker configuration using commands:
@SSP: Set speaker configuration
@GSP: Get speakers configuration
DATA INVALID