IDK MSD-54 Series - Manual (Page 242)

MSD-54 SERIES User’s Guide
242
8.18.3 Automatic key lock for control command keys [COMMAND AUTO LOCK]
You can enable or disable the key lock function to automatically control the command execution keys if no
operation is performed for 30 seconds during the unlocked mode.
This setting is common to both front panel and parallel input.
If you select “ON” and no operation of menu control keys is performed for 30 seconds, the display brightness
is reduced to approximately 25%. When you operate the keys, the luminance will return to 100%.
･OFF
･ON [Default]
1. To set auto key lock using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
OTHERS
▲▼keys: Select “OTHERS”.
↓ SET key
[OTHERS]
COMMAND AUTO LOCK
▲▼keys: Select “COMMAND AUTO LOCK”.
↓ SET key
[COMMAND AUTO LOCK]
O N
▲▼keys: Select “OFF” or “ON”.
↓ ESC key: Returns to the previous screen.
2. To set command auto lock commands:
None