IDK MSD-54 Series - Manual (Page 244)

MSD-54 SERIES User’s Guide
244
8.18.5 Input channel automatic linking [INPUT CHANNEL LINK]
Menus to be adjusted for each channel can be adjusted after the input number is selected. With this menu,
you can select input to be adjusted automatically by switching input in ”7.1 Selecting Input Channels”. This
function is convenient to adjust each input channel based on specific display devices or AV amplifiers.
･Inputs to be adjusted are not selected automatically: OFF [Default]
･When inputs of OUT1 is switched, the input to be adjusted automatically will be selected: OUT1.
･When inputs of OUT2 is switched, the input to be adjusted automatically will be selected: OUT 2.
･When inputs of OUT3 is switched, the input to be adjusted automatically will be selected: OUT 3.
･When inputs of OUT4 is switched, the input to be adjusted automatically will be selected: OUT 4.
Input number to be adjusted keeps settings separately for video and audio.
[ “OUT 1”]
Video adjustment channel=IN1
Audio adjustment channel=IN4
1
Video adjustment channel=IN3
Audio adjustment channel=IN4
2
Video adjustment channel=IN3
Audio adjustment channel=IN2
3
Video adjustment channel=IN3
Audio adjustment channel=IN2
1 IN3 is selected for video input channel of OUT1. IN3 is selected for video adjustment channel automatically.
2 IN2 is selected for audio input channel of OUT1. IN2 is selected for audio adjustment channel automatically.
3 IN5 is selected for audio input channel of OUT2. The adjustment channel is not changed.
[Figure 8.74] Automatic channel selection
Valid for the following menus (video input channel number):
8.3 Setting Position, Size, and Masking
8.3.3 Aspect ratio control of input video
8.3.4 Aspect ratio control
8.3.5 Overscan
8.3.6 Input position
8.3.7 Input size
8.3.8 Input masking
8.3.9 Input automatic sizing
8.4 Video Correction
8.4.1 Input brightness
8.4.2 Input contrast
8.4.3 Hue
8.4.4 Saturation
8.4.5 Black level
8.4.6 Input default color
8.5 Input Settings
7.5.4 Signal type of analog input
8.6 Input Timing Settings
8.6.1 The total number of horizontal dots
8.6.2 Horizontal start position
8.6.3 Horizontal display period
8.6.4 Vertical start position
8.6.5 Vertical display period
8.6.6 Analog input automatic measurement
8.6.9 Loading device data
8.6.10 Registering device data
8.6.11 Tracking
8.18 Others
8.18.7 Input signal status
Valid for the following menus (audio input channel number):
8.8 Audio Settings
8.8.4 Input level
8.8.6 Input lip sync
8.18 Others
8.18.7 Input signal status