IDK MSD-54 Series - Manual (Page 231)

231
1. To divide memory area using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
BITMAP
▲▼keys: Select “BITMAP”.
↓ SET key
[BITMAP]
DIVIDE MEMORY
▲▼keys: Select “DIVIDE MEMORY”.
↓ SET key
[DIVIDE MEMORY]
MODE:
R ESISE NUMBER:1
▲▼keys: Select the desired divide mode (AUTO, RESIZE, DELETE).
↓
◄►keys
[DIVIDE MEMORY]
MODE:RESISE NUMBER:
1
▲▼keys: Set the number of divisions (1 to 4).
↓
◄►keys
[DIVIDE MEMORY]
DISPLAY:
B LOCK
▲▼keys: Select the desired display mode (BLOCK, BYTE).
↓
◄►keys
[BITMAP1 BLOCK]
0- 63( ) 0- 6
3
▲▼keys: Set the end block position of “BITMAP1” (0 to 63). *
↓
◄►keys
[BITMAP2 BLOCK]
64-127( ) 64-12
7
▲▼keys: Set the end block position of “BITMAP2” (64 to 127). *
↓ SET key: Displays the confirmation screen. ↑ ESC key
[DIVIDE MEMORY]
SURE? =
N O
▲▼keys: Select “ YES” or “NO”.
↓To execute divide: Select “YES” and press the “SET” key.
To return to the menu without divide: Select “NO” and press the “SET” key.
[DIVIDE MEMORY]
NOW UPDATE... Displays the message for 1 second before automatically returning to
the previous screen.
↓
[BITMAP]
DIVIDE MEMORY
* If you select “BLOCK” for “DISPLAY”, the current start and end block positions are displayed on the left of
the VFD screen. If a bitmap is registered, the final block position is displayed in parentheses. The start and
end block positions after divide are displayed on the right. If you want to specify the after-divide size directly,
change the end block position.
If you select “BYTE”, their currently reserved memory size is displayed on the left. If a bitmap is registered,
the number of bytes is displayed in parentheses. The memory size after divide is displayed on the right so
that you can specify directly the after-division memory size.
In case the registered bitmap will be deleted as a result of specifying the size directly, an “S” or “E” is
displayed in the upper right.