IDK MSD-54 Series - Manual (Page 33)

33
[Table 7.2] Factory default list (2/5)
Function Factory default
Set for each
I/O/bmp*
INPUT VIDEO DETECT 10000 ms. (10 seconds) 3
HDCP INPUT ENABLE ENABLE 3
INPUT EQUALIZER ON 3
ANALOG INPUT TYPE AUTO 2
INPUT OFF CHECK ON 3
H TOTAL DOTS 0 (when signals are detected, it is set automatically) 2
H START 0 (when signals are detected, it is set automatically) 2
H DISPLAY 0 (when signals are detected, it is set automatically) 2
V START 0 (when signals are detected, it is set automatically) 2
V DISPLAY 0 (when signals are detected, it is set automatically) 2
AUTO START POS ON 2
UNKNOWN TIMING ON -
Device data registered by
user
All 99 data is not registered
2
TRACKING 0 (when signals are input, it is set automatically) 2
OUTPUT EQUALIZER OFF 1
OUTPUT MODE
HDMI YCbCr4:4:4 MODE (outputs with the most suitable
mode depending on the connected display device)
1
SYNC OUTPUT ON 1
VIDEO OUTPUT BLUE 1
VIDEO SWITCHING
MSD-5401/5402/5403/5404:
FREEZE→FADE OUT-IN
MSD-5401SL/5402SL:
DISSOLVE
1
SWITCHING SPEED 350 ms. 1
WIPE COLOR R/G/B: 0(black) 1
HDCP OUTPUT MODE ALWAYS 1
HDCP ERROR RETRY
ETERNITY (Retrying continuously until HDCP authorization
succeeds)
1
DEEP COLOR OUTPUT 24-BIT COLOR 1
CEC CONNECTION NOT CONNECTED 1