IDK MSD-54 Series - Manual (Page 189)

189
8.13.5 Saving all settings [SAVE ALL SETTING]
You can save up to 8 settings of the following settings:
･7.1 Selecting Input Channels
･8.3 Setting Position, Size, and Masking
･8.3.1 Output resolutions
･8.3.2 Aspect ratio control of output video
･8.3.3 Aspect ratio control of input video
･8.3.4 Aspect ratio
･8.3.5 Overscan
･8.3.6 Input position
･8.3.7 Input size
･8.3.8 Input masking
･8.3.10 Output position
･8.3.11 Output size
･8.3.12 Output masking
･8.3.14 Background color
･8.3.15 Test pattern
･8.4 Video Correction
･8.4.1 Input brightness
･8.4.2 Input contrast
･8.4.3 Hue
･8.4.4 Saturation
･8.4.5 Black level
･8.4.7 Output brightness
･8.4.8 Output contrast
･8.5 Input Settings
･8.5.1 No-signal input monitoring
･8.5.2 HDCP input enabled/disable
･8.5.3 Input equalizer
･8.5.4 Signal type of analog input
･8.5.5 Automatic detection of input video interruption
･8.6 Input Timing Settings
･8.6.1 The total number of horizontal dots
･8.6.2 Horizontal start position
･8.6.3 Horizontal display period
･8.6.4 Vertical start position
･8.6.5 Vertical display period
･8.6.7 Automatic measurement of start position
･8.6.8 Automatic setting of input timing
･8.6.11 Tracking
･8.7 Output settings
･8.7.1 Output equalizer
･8.7.2 Output mode
･8.7.3 Synchronous signal output with no input video
･8.7.4 Output video with no input video
･8.7.5 Window transition effect
･8.7.6 Window transition
･8.7.7 Wipe color
･8.7.8 HDCP output mode
･8.7.9 The number of HDCP retries
･8.7.10 Deep Color
･8.7.11 CEC (Consumer Electronics Control)
･8.8 Audio Settings
･8.8.1 Output level
･8.8.2 Output mute
･8.8.3 Input selection
･8.8.4 Input level
･8.8.5 Output lip sync
･8.8.6 Input lip sync
･8.8.7 Sampling frequency of analog audio input
･8.8.8 Output connector
･8.8.9 Multi-channel audio output
･8.8.10 Test tone
･8.9 EDID (Extended Display Identification Data)
･8.9.1 EDID setting
･8.9.2 PC resolutions
･8.9.3 HDTV resolutions
･8.9.4 Deep Color
･8.9.5 Audio format
･8.9.6 Speaker configuration
Note:
Do not turn off the MSD while “NOW SAVING...” is displayed. Otherwise, setting data may be lost.