IDK MSD-54 Series - Manual (Page 26)

MSD-54 SERIES User’s Guide
26
7.3 Turning ON/OFF Display Devices
Use the “DISPLAY POWER” keys to turn on/off the connected display devices:
POWER
ON
OFF
DIGITAL
MULTI
SWITCHER
POWER
DISPLAY
1
2
3
4
Power switches for
display devices
[Figure 7.3] DISPLAY POWER keys for display devices
Since no values are registered at the factory, in order to use the front panel DISPLAY POWER keys, the
settings for those keys must be first registered into system memory (“8.12.3 Command link”). If you press the
keys accidentally, the display device may be turned off. This can be avoided by pressing and holding the
DISPLAY POWER keys for the registered number of seconds set in “8.18.4 DISPLAY POWER key pressing
time”.
When a command for turning on or off is sent to the display device and the reply command for normal
transmission is received from the display device, the LED of the key turns orange (Power ON) or is turned off
(power OFF). However, if the reply command is not checked, the actual power status of the display device
and LED of DISPLAY POWER key sometimes do not match.
Command control: Setting for display device power switch @SDS /@GDS