IDK MSD-54 Series - Manual (Page 72)

MSD-54 SERIES User’s Guide
72
8.3.15 Test pattern [TEST PATTERN]
You can scroll at a speed of 3 to 30 pixels/a frame by using ”COLOR BAR”, “GRAY SCALE”, “LAMP”, and
“ZEBRA”.
･OFF [Default]
･V-COLOR BAR ･100% WHITE RASTER ･OUTPUT FRAME
･H-COLOR BAR ･50% WHITE RASTER ･VERTICAL STRIPE
･V-GRAY SCALE ･RED RASTER ･HORIZONTAL STRIPE
･H-GRAY SCALE ･GREEN RASTER ･VERTICAL ZEBRA
･VERTICAL LAMP ･BLUE RASTER ･HORIZONT ZEBRA
･HORIZONTAL LAMP ･CROSS HATCH
VERTICAL LAMP OFF
(Normal video output）
50% WHITE
RASTER
V-COLOR BAR V-GRAY SCALE
RED RASTER GREEN RASTER BLUE RASTER
100% WHITE RASTER
CROSS HATCH OUTPUT FRAME VERTICAL
STRIPE
HORIZONTAL
STRIPE
VERTICAL
ZEBRA
H-COLOR BAR H-GRAY SCALE
HORIZONTAL
LAMP
HORIZONTAL
ZEBRA
[Figure 8.26] Test patterns
･Scroll: OFF [Default]
3 pixel per frame to 30 pixel per frame (by 3 pixels per frame)
Note:
For test patterns other than “OUTPUT FRAME”: Video is output on the full screen with the resolution set in
“8.3.1 Output resolutions” and the display position and display size will be invalid.
For “OUTPUT FRAME”: Use this pattern if edges are cut off due to enlargement display on the display device,
and settings of “8.3.10 Output position” and “8.3.11 Output size” will be applied.
When a test pattern is displayed, all settings of “8.4 Video Correction” will be invalid.
For each output