IDK MSD-54 Series - Manual (Page 95)

95
8.6.5 Vertical display period [V DISPLAY]
･Vertical display period: 10 to 2048 (Equal or less than [The total number of vertical lines – 10])
[Default]: Depends on input signals
[Figure 8.35] Vertical display period
1. To set the vertical display period using menu:
Top
↓ SET key
▲▼keys: Select “INPUT TIMING”.
↓ SET key
▲▼keys: Select “V DISPLAY”.
↓ SET key
▲▼keys: Set the vertical display period.
◄►keys: Select the desired input (IN1 to IN9).
↓ ESC key: Returns to the previous screen.
Note:
You can set the vertical display period only if there is an input signal. If no signal is
input, you cannot set the period, and the message shown right is displayed.
2. To set the vertical display period using commands:
@SVD: Set vertical display period
@GVD: Get vertical display period
MSD-5404
[FUNCTION SELECT]
INPUT TIMING
[INPUT TIMING]
V DISPLAY
[IN6 V DISPLAY]
76
8 LINE
[IN6 V DISPLAY]
NOT AVAILABLE NOW
Vertical
synchronizing signals
Video signals
Vertical display period = Lines displaying image
Total vertical lines
For each input port/input signal