IDK MSD-54 Series - Manual (Page 249)

249
8.18.8 Display device status [MONITOR STATUS]
You can display the status of display device connected to video output connectors.
1. To display status of display device using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
OTHERS
▲▼keys: Select “OTHERS”.
↓ SET key
[OTHERS]
MONITOR STATUS
▲▼keys: Select “MONITOR STATUS”.
↓ SET key
OUT 1 2 3 4
S S N Displays the status of the display device connected to output
connectors.
↓ ▲▼ keys
[OUT1 MONITOR] H30
HDCP SUPPORT
Displays the statuses of display device connected to OUT1.
▲▼ keys
[OUT4 MONITOR]
UNCONNECTED
Displays the statuses of display device connected to OUT4.
↓ ESC key: Returns to the previous screen.
A) To output all connectors, channel number is displayed on the upper row and HDCP authorization state is
displayed on the lower row with one of the following alphabet characters.
B) To output each connector, HDCP authorization state is displayed on the lower row with one of the following
character strings.
A) B) Description
S HDCP SUPPORT HDCP-compliant display device is connected.
N HDCP NOT SUPPORT Non-HDCP-compliant display device is connected.
E HDCP ERROR
HDCP-compliant display device is connected, but the authentication
failed.
C HDCP CHECK NOW
Displayed when status of display device is being checked. (such as
when connection status of monitor is changed.)
D
MONITOR
DISCONNECT
Monitor is disconnected (displayed only for 1 second)
UNCONNECTED No display device is connected.
If it is displayed for each output connector and if a display device is connected, output signal type is displayed
on the upper right, and color depth is displayed only if HDMI is output.
H24: HDMI signals of 24-BIT COLOR are output.
H30: HDMI signals of 30-BIT COLOR are output.
D : DVI signals are output.