IDK MSD-54 Series - Manual (Page 56)

MSD-54 SERIES User’s Guide
56
when the input aspect ratio is 16:9.)
If no recognition signals with valid aspect ratio is input or if you use the fixed aspect ratio, you can select “4:3”,
“16:9”, “14:9”, “16:9 LETTER BOX”, “14:9 LETTER BOX”, “4:3 SIDE PANEL”, or “14:9 SIDE PANEL”.
Settings of “4:3”, “16:9”, “14:9”, “16:9 LETTER BOX”, “14:9 LETTER BOX”, “4:3 SIDE PANEL” and “14:9 SIDE
PANEL” are valid only if TV signals are input. If PC signals are input and even if you select “AUTO-1”,
“AUTO-2”, “4:3”, “16:9”, “14:9”, “16:9 letter box”, “14:9 letter box”, “4:3 side panel”, or “14:9 side panel”, the
aspect ratio will be selected automatically based on the aspect ratio of the input signals.
If you select “FULL”, video is displayed in full screen at all times regardless of input video signals, settings of
“8.3.2 Aspect ratio control of output video” and “8.3.4 Aspect ratio ”.
Input signal
4:3
4:3
Vertically long
Vertically long
5:4
Vertically long
Vertically long
Vertically long
5:3
Horizontally
long
Vertically long
Horizontally long
16:9
Horizontally
long
Horizontally long
16:10
Horizontally
long
Vertically long
Horizontally long
Aspect ratio of destination display device
16: 9 letter box
14: 9 letter box
Vertically long
Vertically long
Horizontally long
Horizontally long Horizontally long
Horizontally long
16:9
14:9
16:10 Vertically long Vertically long
Horizontally long
Horizontally long
5:4 Horizontally long Horizontally long Horizontally long Horizontally long
5:3 Vertically long Vertically long Horizontally long Vertically long
* Aspect ratio set for the display device refereed
Horizontally long
[Figure 8.18] Full screen display
Note:
If you select “THROUGH”, the input video is displayed with pixel ratio of 1:1 regardless of settings of “8.3.2
Aspect ratio control of output video” and “8.3.4 Aspect ratio ”.