IDK MSD-54 Series - Manual (Page 24)

MSD-54 SERIES User’s Guide
24
7 Basic Operations
7.1 Selecting Input Channels
To select channels for outputting video or audio:
■ Procedure
1
Select the desired mode by the SWITCHING MODE key.
Every time you press the key, the mode changes sequentially as follows:
V&A (video & audio simultaneously; set by default)
VIDEO (only video)
AUDIO (only audio)
The LED of the selected mode illuminates.
[Figure 7.1] SWITCHING MODE selection key
2
Press the desired input channel selection key (IN1 to IN9, OFF) to set a channel to output video or
audio.
The LEDs of the selected video/audio inputs illuminate.
Command control: Switching video and audio channel simultaneously: @SSW/@GSW
Switching video channel: @SSV/@GSV
Switching audio channel: @SSA/@GSA
AUDIO VIDEO V&A
SWITCHING MODE