IDK MSD-54 Series - Manual (Page 51)

51
8.3.2 Aspect ratio control of output video [MONITOR ASPECT]
This setting will be used to restore the aspect ratio to the normal ratio in “8.3.3 Aspect ratio control of input
video”.
･RESOLUTION [Default]
･5:3
･4:3 ･16:9
･5:4 ･16:10
If you select “RESOLUTION”, the MSD finds that a display device whose aspect ratio is the same as that is
selected in “8.3.1 Output resolutions” is connected.
[Table 8.1] Output resolution and aspect ratio
Output resolution
Aspect
ratio
Output resolution
Aspect
ratio
Output resolution
Aspect
ratio
VGA(640×480) 4:3 WXGA(1360×768) 16:9 VESAHD(1920×1080) 16:9
SVGA(800×600) 4:3 WXGA(1366×768) 16:9 WUXGA(1920×1200) 16:10
XGA(1024×768) 4:3 SXGA+(1400×1050) 4:3 QWXGA(2048x1152) 16:9
WXGA(1280×768) 5:3 WXGA+(1440×900) 16:10 480i,p(720×480) 4:3
WXGA(1280×800) 16:10 WXGA++(1600×900) 16:9 576i,p(720×576) 4:3
Quad-VGA(1280×960) 4:3 UXGA(1600×1200) 4:3 720p(1280×720) 16:9
SXGA(1280×1024) 5:4 WSXGA+(1680×1050) 16:10 1080i,p(1920×1080) 16:9
If aspect ratio of the target display device and the ratio set in “8.3.1 Output resolutions” differs, you can
select the aspect ratio of the display device from “4:3”, “5:4”, “5:3”, “16:9”, or “16:10”.
1. To select aspect ratio of the display device to be connected using menu:
MSD-5404
Top
↓ SET key
[FUNCTION SELECT]
OUTPUT TIMING
▲▼keys: Select “OUTPUT TIMING”.
↓ SET key
[OUTPUT TIMING]
MONITOR ASPECT
▲▼keys: Select “MONITOR ASPECT”.
↓ SET key
[MONITAR ASPECT]
R ESOLUTION
▲▼keys: Select the desired monitor aspect.
(RESOLUTION, 4:3, 5:4, 5:3, 16:9, 16:10)
◄►keys: Select the desired output (OUT1 to OUT4).
↓ ESC key: Returns to the previous screen.
2. To select aspect ratio of the display device to be connected using commands:
@SUM: Set display aspect ratio
@GUM: Get display aspect ratio
For each output