IDK MSD-54 Series - Manual (Page 49)

49
8.3.1 Output resolutions [RESOLUTION]
If you select “AUTO”, the optimum resolution is automatically applied.*
If you want to select a resolution other than “AUTO”, select the same resolution as the display device so that
the video is displayed more clearly.
If you change the output resolution, relative display position and size of the output video are not changed.
* If you select “AUTO”, the MSD finds the optimal resolution from EDID (see section ”8.9 EDID“ for details) of
the display device and displays the current resolution in brackets on the VFD screen. If the MSD cannot load
EDID from the display device, it outputs the video with the resolution used the last time and displays a “*”
after the current output resolution. Available output resolutions of The MSD are as follows and they can only
be selected manually. If the resolution of the display device is not found, the closest resolution is used and a
“*” is displayed after the resolution as well.
[RESOLUTION]
A UTO(1080p59.94)
[RESOLUTION]
A UTO(1080p59.94)*
[With the optimum resolution] [EDID cannot be load or without identical optimum resolution]
･AUTO [Default] ･WXGA+@60 (1440x900) ･720p@50 (1280x720)
･VGA@60 (640x480) ･WXGA++@60 (1600x900) ･[email protected] (1280x720)
･SVGA@60 (800x600) ･UXGA@60 (1600x1200) ･720p@60 (1280x720)
･XGA@60 (1024x768) ･WSXGA+@60 (1680x1050) ･1080i@50 (1920x1080)
･WXGA@60 (1280x768) ･VESAHD@60 (1920x1080) ･[email protected] (1920x1080)
･WXGA@60 (1280x800) ･WUXGA@60 (1920x1200) ･1080i@60 (1920x1080)
･Quad-VGA@60 (1280x960) ･QWXGA@60 (2048x1152) ･1080p@50 (1920x1080)
･SXGA@60 (1280x1024) ･[email protected] (720x480) ･[email protected] (1920x1080)
･WXGA@60 (1360x768) ･[email protected] (720x480) ･1080p@60 (1920x1080)
･WXGA@60 (1366x768) ･576i@50 (720x576)
･SXGA+@60 (1400x1050) ･576p@50 (720x576)
Numbers following “@” are vertical synchronous frequency. For outputting high definition,
50Hz/59.94Hz/60Hz can be selected.
480i/480p/576i/576p/720p/1080i/1080p is the timings of CEA-861E standard. Others are timings
meeting VESA DMT standard or VESA CVT standard. VESAHD@60, WUXGA@60, and
QWXGA@60 are output with Reduced Blanking.
Note 1:
If connecting an IDK’s distribution amplifier between the MSD and display device and set the resolution to
“AUTO”, set the EDID of the distribution amplifier to “EXTERNAL” which enables the MSD to load the EDID
from the display device.
Note 2:
For the model MSD-5402SL only: Resolutions cannot be set for each output. OUT1 and OUT2 are output
always with the same resolution.
For each output