2 rear panel, Rear panel – IDK MSD-54 Series User Manual

Page 17

Advertising

5.2 Rear Panel

[Figure 5.1] Rear panel

Name

Description

HDMI input connectors

(HDMI/DVI IN1 to IN5)

DVI signals can be input using an HDMI-DVI

conversion cable.

Analog video input connectors

(ANALOG RGB/YPbPr/VIDEO IN6 to IN9)

The following analog video signal formats from

devices can be input: Composite video (NTSC/PAL),

S-video (NTSC/PAL), analog RGB (such as PCs) and

YPbPr (SDTV/HDTV).

Audio input connectors

(AUDIO IN1 to IN9)

Input connectors for stereo audio signals.

Cannot be used with embedded audio signals of

HDMI input connector.

HDMI output connectors

(HDMI/DVI OUT1 to OUT4)

When a DVI display device is connected, DVI signals

are output automatically. Built-in cable equalizing

circuit enables 5 m/ 16.4 ft. or longer cables to be

connected.

Audio output connectors

(AUDIO OUT1 to OUT4)

Output connectors for stereo audio signals.

LAN port (LAN)

For external control by communication commands or

web browsers.

RS-232C ports

(RS-232C CH1, CH2)

For external control by communication commands

using serial connector.

PARALLEL input port (PARALLEL)

For external control by contacts.

Tally output port (TALLY)

For external control by contacts.

Maintenance port (UPDATE)

Not used.

Keep this connector free.

AC power connector (AC 100 V to 240 V)

For the provided power cable.

Frame ground (FG)

For indoor ground terminal.

The HDMI I/O connectors support HDCP (High-bandwidth Digital Content Protection), which is a copy

protection technique developed by Intel. If DVDs or other contents with copyright protection are played,

both source devices (such as DVD players connected to input connectors) and display devices (connected

to output connectors) are required to be HDCP compliant.

S/N

HDMI/DVI

OUT 1

OUT 2

OUT 3

OUT 4

IN 1

IN 2

IN 3

IN 4

IN 5

ANALOG RGB / YPbPr / VIDEO

HDMI/DVI

AUDIO

RS-232C CH2

LAN

UPDATE

RS-232C CH1

TALLY

PARALLEL

IN 7

IN 9

IN 8

IN 6