IDK MSD-54 Series User Manual
Page 35
35
[Table 7.4] Factory default (4/5)
Function
Factory default
Set for each
I/O/bmp*
COMMAND EDIT
All 32 commands are not registered.
-
RECV COMMAND EDIT
All 32 commands are not registered.
-
COMMAND LINK
All 98 commands are not registered.
-
INVALID TIME
0 ms.
-
COMMAND TALLY
Lights if control command is registered.
-
FLASH TIME
For control command execution key: OFF (does not blink)
For display device power switch:
EXECUTION (blinks while control command is executed)
-
CROSS POINT MEMORY
All nine are not controlled channel.
-
PRESET MEMORY
All eight are not registered.
-
STARTUP
Last channel
(Starts up with settings, which are set at the time of turns off
the MSD last time.)
-
FUNCTION ASSIGN
See [Table 8.23] to [Table 8.26]
-
AUDIO VOLUME
PUSH SWITCH
-
ROTARY ENCODER
5
-
LOCK SETTING
OFF
-
SWITCHING MODE
V&A
-
CHANNEL TOGGLE
OFF
-
CHATTERING FILTER
Push switch: 30 ms.
Rotary encoder: 0 ms.
-
BUZZER
OFF
-
AUTO SETUP
ENABLE
-