IDK MSD-54 Series - Manual (Page 200)

MSD-54 SERIES User’s Guide
200
■Functions (cont’d)
[Table 8.28] Functions of parallel input connector (2/2)
Description Function Description Function
V&A:OUT2-IN1
*2
Selecting video and
audio input channels
of OUT 2 *
9
V&A:OUT4-IN1
*2
Selecting video and audio
input channels of OUT 4
*
9
to to
V&A:OUT2-IN9
*2
V&A:OUT4-IN9
*2
V&A:OUT2-OFF V&A:OUT4-OFF
VIDEO:OUT2-IN1
*2
Selecting video input
channels of OUT 2 *
9
VIDEO:OUT4-IN1
*2
Selecting video input
channels of OUT 4 *
9
to to
VIDEO:OUT2-IN9
*2
VIDEO:OUT4-IN9
*2
VIDEO:OUT2-OFF VIDEO:OUT4-OFF
AUDIO:OUT2-IN1
*2
Selecting audio input
channels of OUT 2 *
9
AUDIO:OUT4-IN1
*2
Selecting audio input
channels of OUT 4 *
9
to to
AUDIO:OUT2-IN9
*2
AUDIO:OUT4-IN9
*2
AUDIO:OUT2-OFF AUDIO:OUT4-OFF
V&A:OUT3-IN1
*2
Selecting video and
audio input channels
of OUT 3 *
9
to
V&A:OUT3-IN9
*2
V&A:OUT3-OFF
VIDEO:OUT3-IN1
*2
Selecting video input
channels of OUT 3 *
9
to
VIDEO:OUT3-IN9
*2
VIDEO:OUT3-OFF
AUDIO:OUT3-IN1
*2
Selecting audio input
channels of OUT 3 *
9
to
AUDIO:OUT3-IN9
*2
AUDIO:OUT3-OFF
*1
Channels (video/audio) to be switched depend on the channel switching mode selected.
*2
If you want to switch the selected channel and turn “OFF” alternately, set “8.14.6 Toggle“ to “ON”.
If you want to perform automatic measurement of input timing setting ([Ref. 8.6.6 Analog input auto]), set
“8.14.9 Analog input measurement“ to “ENABLE” and press one of IN6 to IN9 keys for 2 seconds or
longer. For details of automatic measurement, see “8.6.6 Analog input automatic measurement”.
*3
Channel switching modes of the front panel and parallel input are independent from each other. If you want
to use the fixed channel switching mode, set it using the menu in “8.14.5 Switching mode”.
*4
While control command is locked, you cannot input parallel of COMMANDs A to I. The front panel and
parallel inputs have their own settings for control commands and can lock independently.
*5
For audio output level, you can select “PUSH SWITCH” or “ROTARY ENCODER” in “8.14.2 Audio level”.
*6
All parallel inputs are locked. You cannot select a target function that has been locked. This function can
also be set in “8.14.4 Enable/Disable”.
*7
All parallel inputs are locked. You cannot select a specific function that will be locked. This function can also
be set in “8.18.1 Key lock
”.
*8
Toggle operation from the current state. (If it is now “OFF”, it turns to “ON”, and vice versa.)
*9
Channels (video/audio) to be switched do not depend on the selected channel switching mode.