IDK MSD-54 Series - Manual (Page 122)

MSD-54 SERIES User’s Guide
122
If bit stream signals (compressed audio) such as Dolby Digital are input to HDMI digital audio, these input
audio signals are output to digital audio as they are. They are not output to analog audio, and audio volume
cannot be adjusted.
[Figure 8.43] Inputting/Outputting Bit stream signals
8.8.1 Output level [OUTPUT LEVEL]
You can set the audio output level using audio output volume.
･Audio output level: -60 dB to +10 dB [Default]: ±0 dB
Note: If you change the output level while “8.8.2 Output mute“ is set to ”ON”, mute is canceled.
If you set “8.18.6 Top VFD screen” to “AUDIO VOLUME”, you can set the audio output level on the top
screen.
1. To set the audio output level using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
AUDIO
▲▼keys: Select “AUDIO”.
↓ SET key
[AUDIO]
OUTPUT LEVEL
▲▼keys: Select “OUTPUT LEVEL”.
↓ SET key
[OUT1 AUDIO VOLUME]
0 dB
▲▼keys: Set the audio output level (-60 to +10).
◄►keys: Select the desired output (OUT1 to OUT4).
↓ ESC key: Returns to the previous screen.
2. To set the audio output level using commands:
@SSL: Set audio output level
@GSL: Get audio output level
@SOL: Set relative value of audio output level
@GOL: Get limit status of audio output level
Switch
Analog audio not output
Adjusting audio volume disabled
Analog output
Digital output
Bit stream signals
Digital input
Blu-ray disc player
AV Amplifier
Amplifier built in speaker
For each output