IDK MSD-54 Series - Manual (Page 78)

MSD-54 SERIES User’s Guide
78
8.4.5 Black level [INPUT SETUP LEVEL]
You can set the black level of the input video:
▪ Setup level: -10.0% to +10.0% by 0.5% step [Default]: ±0.0%
If black level of output video is low (light black), set the level toward the minus direction.
If black level is high (dark black), set the level toward the plus direction.
Even if you change the setup level, the white level is not changed.
1. To set the setup level using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
IMAGE EFFECT
▲▼keys: Select “IMAGE EFFECT”.
↓ SET key
[IMAGE EFFECT]
INPUT SETUP LEVEL
▲▼keys: Select “INPUT SETUP LEVEL”.
↓ SET key
[IN1 SETUP LEVEL]
0. 0 %
▲▼keys: Set the black level (-10.0% to +10.0%).
▲▼keys: Select the desired input (IN1 to IN9).
↓ ESC key: Returns to the previous screen.
2. To set the setup level using commands:
@SSU: Set black level
@GSU: Get black level
For each input port/input signal