IDK MSD-54 Series - Manual (Page 93)

93
8.6.3 Horizontal display period [H DISPLAY]
･Horizontal display period: 64 to 2900 (Equal or less than [The total number of horizontal dots - 64])
[Default]: Depends on input signals
[Figure 8.33] Horizontal display period
The settable range depends on setting of “8.6.1 The total number of horizontal dots”. If the set value is
[Total number of horizontal dots >Horizontal displaying period] and the setting of horizontal display period
exceeds the limit value by changing the total number of horizontal dots, the horizontal display period is set to
the limit value of the set range automatically.
1. To set the horizontal display period using menu:
Top
↓ SET key
▲▼keys: Select “INPUT TIMING”.
↓ SET key
▲▼keys: Select “H DISPLAY”.
↓ SET key
▲▼keys: Set the horizontal display period.
◄►keys: Select the desired input (IN1 to IN9).
↓ ESC key: Returns to the previous screen.
Note:
You can set the horizontal display period only if there is an input signal. If no signal
is input, you cannot set the period, and the message shown right is displayed.
2. To set the horizontal display period using commands:
@SHD: Set horizontal display period
@GHD: Get horizontal display period
MSD-5404
[FUNCTION SELECT]
INPUT TIMING
[INPUT TIMING]
H DISPLAY
[IN6 H DISPLAY]
102
4 DOT
[IN6 H DISPLAY]
NOT AVAILABLE NOW
Horizontal
synchronizing signal
Video signals
Horizontal display period = The number of dots displaying video
Total horizontal dots
For each input port/input signal