IDK MSD-54 Series - Manual (Page 117)

117
8.7.10 Deep Color [DEEP COLOR OUTPUT]
“30-BIT COLOR”: signals are output with “30-BIT COLOR” only if a display device supporting Deep Color is
connected. If a display device that does not support Deep Color is connected, signals are output with “24-BIT
COLOR” automatically. However, since the transmission clock of ”30-BIT COLOR” is faster than that of
“24-BIT COLOR”, noise may occur if a bad-quality cable or long cable is connected. In those cases, the noise
may be removed by selecting ”24-BIT COLOR”.
･24-BIT COLOR [Default]
･30-BIT COLOR
1. To set the Deep Color of HDMI outputs using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
OUTPUT SETTING
▲▼keys: Select “OUTPUT SETTING”.
↓ SET key
[OUTPUT SETTING]
DEEP COLOR OUTPUT
▲▼keys: Select “DEEP COLOR OUTPUT”.
↓ SET key
[OUT1 DEEP COLOR]
2 4-BIT COLOR
▲▼keys: Select the desired color depth (24-BIT COLOR or 30-BIT
COLOR).
◄►keys: Select the desired output (OUT1 to OUT4).
↓ ESC key: Returns to the previous screen.
2. To set the Deep Color of HDMI outputs using commands:
@SDC: Set Deep Color
@GDC: Get Deep Color
For each output