IDK MSD-54 Series - Manual (Page 247)

247
8.18.7 Input signal status [INPUT STATUS]
You can display the input signal status that is from video input connectors.
1. To display input status using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
OTHERS
▲▼keys: Select “OTHERS”.
↓ SET key
[OTHERS]
INPUT STATUS
▲▼keys: Select “INPUT STATUS”.
↓ SET key
IN1 2 3 4 5 6 7 8 9
H D R Y Y V
Displays statuses of all input connectors.
↓ ▲▼ keys
[IN1 FORMAT] 24
1080p 59.94Hz H
Displays video input status of IN1.
↓ ▲▼ keys
[IN1 AUDIO] M
LINEAR PCM 48kHz
Displays audio input status of IN1.
↓ ▲▼ keys
[IN2 FORMAT]
NO SIGNAL
Displays video input status of IN2.
▲▼ keys
[IN9 FORMAT]
1080i 59.94Hz Y
Displays video input status of IN9.
↓ ESC key: Returns to the previous screen.
For the status of all input connectors, channel numbers are displayed on the upper row and input signal status
is displayed on the lower row.
[Input signal type]
These alphabets are displayed under the input numbers:
H: HDMI signals are input
D: DVI signals are input
R: Analog RGB signals are input
Y: Analog YPbPr signals are input
V: Analog composite video signals are input
S: Analog S-Video signals are input
No alphabet: No signal is input
”H” (upper, if it is with HDCP) or “A” (lower, if digital audio is embedded) is displayed at the right of an alphabet
above appear only for IN1 to IN5.