IDK MSD-54 Series User Manual
Page 221
221
[Transferring bitmap file via browser]
*IDK evaluated the operation on Microsoft Internet Explorer 6.0, 7.0 and 8.0 for Windows. It may not operate
correctly on other versions or on other browsers.
Open the WEB browser on a PC using the same LAN and enter the IP address of the MSD followed by
“/bitmap.html” to open the window that is for sending bitmap files.
･When ”80” is set for port number of browser control port:
http://192.168.1.199/bitmap.html
･When a number other than “80” (5000 to 5999) is set for port number of browser control port:
(For example, the port number is 5000)
1. (Memory Number is displayed only if the bitmap area is divided.) Select the number you
want to register.
2. Click “Browse ” to display the file selection window and select the desired bitmap file.
3. Click “SEND” to send the bitmap file to the MSD.
[Figure 8.66] Sending a bitmap file from browser
When bitmap file is sent correctly, the message below is displayed on the VFD screen and the bitmap file is
saved. Do not turn off the MSD while the message is being displayed.
BITMAP SAVE NOW
PLEASE WAIT