IDK MSD-54 Series - Manual (Page 174)

MSD-54 SERIES User’s Guide
174
DATA:
1:
▲key
DATA: % 1POWR 0
1:
At the 1st byte: PJLink command can be selected.
▲key
The right of Delimiter(CR): PJLink command can be
selected.
DATA:%1POWR 0
10: DATA:%1POWR 0 % 1POWR
10:0
▲key
DATA:%1POWR 0
8:
DATA:%1POWR 1
8:
At other positions: ASCII code can be selected.
[PJLink]
The MSD supports PJLink (class1), which is the standard protocol to control projectors. If you set “PJLink” to
“ON”, the PJLink command can be selected at the time of inputting the reply command data.
You can select PJLink command by pressing ▲▼keys when the cursor is at the first byte of the data or right
of the delimiter (CR). You can select ASCII codes (text) and change parameters by pressing the keys when
the cursor is at another position.
[Figure 8.53] Selecting PJLink commands (class1)
2.
To edit the reply command using commands:
@SRC: Set reply command
@GRC: Get reply command