IDK MSD-54 Series - Manual (Page 160)

MSD-54 SERIES User’s Guide
160
1. To edit the control command using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
PRESET COMMAND
▲▼keys: Select “PRESET COMMAND”.
↓ SET key
[PRESET COMMAND]
COMMAND EDIT
▲▼keys: Select “COMMAND EDIT”.
↓ SET key
[COMMAND EDIT]
CMD
1
▲▼keys: Select the desired control command (CMD 1 to CMD 32).
“MEMO” is displayed on the right of the command number.
↓ SET key ↑ ESC key: Cancels the setting and returns to the previous screen.
PORT: C OM SIZE: 0BYTE
DELAY: 0s000ms
▲▼keys: Set the desired port (COM, Tally, CEC).
↓
◄►keys
After this step, procedures differ depending on the settings of “PORT”.
Go to steps I, II, or III depending on the PORT setting being selected.