IDK MSD-54 Series - Manual (Page 210)

MSD-54 SERIES User’s Guide
210
8.15.1 Assigning functions [FUNCTION ASSIGN]
1. To assign functions to Tally output connectors using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
TALLY
▲▼keys: Select “Tally”.
↓ SET key
[TALLY]
FUNCTION ASSIGN
▲▼keys: Select “FUNCTION ASSIGN”.
↓ SET key ↑ ESC key: Cancels the setting and returns to the previous screen.
[TALLY PIN: 2]
O UT1-IN1
▲▼keys: Select the desired function for input pin 2. *
◄►keys
[TALLY PIN:49]
N OT USE
▲▼keys: Select the desired function for input pin 49. *
↓ SET key: Applies settings.
[TALLY FUNCTION]
NOW UPDATE... Displays the message for 1 second before automatically returning to
the previous screen.
↓
[TALLY]
FUNCTION ASSIGN
* You cannot assign functions to the following pins, and they are not displayed: Pins1, 25, 26, and 50.
Note:
If you do not press the “SET” key, the assignment is not changed. Make sure to press the “SET” key.
2. To assign functions to Tally output connectors using commands:
@STE: Set function assignment of Tally output
@GTE Get function assignment of Tally output