IDK MSD-54 Series - Manual (Page 187)

187
[PRESET MEMORY]
EDIT CROSS POINT
* “---“ is displayed for settings that do not control channels. Outputs that do not control channels when cross
point memory is loaded do not switch channels.
All cross point memories are set to not to control channel by factory default.
OUT 1 = Input channel 1
OUT 2 = Input channel 2
OUT 3 = Input channel 3
OUT 4 = Input channel 4
Current input channel setting
OUT 1 = Input channel 3
OUT 2 = Not controlled (---)
OUT 3 = Input channel 1
OUT 4 = Not controlled (---)
Settings of current cross point memory １
Load
OUT 1 = Input channel 3
OUT 2 = Input channel 2
OUT 3 = Input channel 1
OUT 4 = Input channel 4
Input channel settings after loading cross point memory
Not changed
[Figure 8.58] Loading edited cross point memory
2. To edit the cross point using commands:
@ECM: Edit video and audio channel setting in cross point memory
@ECV: Edit video channel setting in cross point memory
@ECA: Edit audio channel setting in cross point memory
@GCM: Get video and audio channel setting in cross point memory
@GCV: Get video channel setting in cross point memory
@GCA: Get audio channel setting in cross point memory