Lenze EVF9333−xV - Manual (Page 302)

Configuration
Function blocks
Internal motor control with V/f characteristic control (MCTRL1)
8
8.2
8.2.6
l
8.2−40 EDSVF9333V EN 6.2−04/2012
After a signal request, the motor is decelerated to standstill when an internal
ramp function generator has been activated.
Mode of operation
ƒ Quick stop is active
– MCTRL−QSP = HIGH
– The control word DCTRL−QSP is applied
– DC injection braking (GSB) is not active (GSB has priority over quick
stop)
ƒ If quick stop is active, the motor brakes to standstill with the
deceleration time set in C0105. MCTRL−QSP−OUT is set to HIGH.
Quick stop (QSP)