Lenze EVF9333−xV - Manual (Page 4)

Contents i
l
ii EDSVF9333V EN 6.2−04/2012
4.3 Standard devices with a power of 45 kW 4.3−1 . . . . . . . . . . . . . . . . . . . . . . . .
4.3.1 Important notes 4.3−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.2 Mounting with fixing brackets (standard) 4.3−2 . . . . . . . . . . . . . . .
4.3.3 Thermally separated mounting (push−through technique) 4.3−3 .
4.4 Standard devices in the power range of 55 kW 4.4−1 . . . . . . . . . . . . . . . . . . .
4.4.1 Important notes 4.4−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4.2 Mounting with fixing brackets (standard) 4.4−2 . . . . . . . . . . . . . . .
4.4.3 Thermally separated mounting (push−through technique) 4.4−3 .
4.4.4 Modification of the fan module for push−through technique 4.4−4
4.5 Standard devices in the power range 75 ... 90 kW 4.5−1 . . . . . . . . . . . . . . . .
4.5.1 Important notes 4.5−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.5.2 Mounting with fixing brackets (standard) 4.5−2 . . . . . . . . . . . . . . .
4.5.3 Thermally separated mounting (push−through technique) 4.5−3 .
5 Wiring of the standard device 5−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1 Important notes 5.1−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1.1 Protection of persons 5.1−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1.2 Device protection 5.1−3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1.3 Motor protection 5.1−3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2 Notes on project planning 5.2−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2.1 Supply forms / electrical supply conditions 5.2−1 . . . . . . . . . . . . . .
5.2.2 Operation on public supply systems
(compliance with EN 61000−3−2)
5.2−1 . . . . . . . . . . . . . . . . . . . . . . .
5.2.3 Controllers in the IT system 5.2−2 . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2.4 Operation at earth−leakage circuit breaker (e.l.c.b.) 5.2−3 . . . . . . .
5.2.5 Interaction with compensation equipment 5.2−3 . . . . . . . . . . . . . .
5.2.6 Discharge current for mobile systems 5.2−4 . . . . . . . . . . . . . . . . . .
5.2.7 Optimisation of the controller and mains load 5.2−5 . . . . . . . . . . .
5.2.8 Reduction of noise emissions 5.2−6 . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2.9 Mains choke/mains filter assignment 5.2−8 . . . . . . . . . . . . . . . . . .
5.2.10 Motor cable 5.2−10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3 Basics for wiring according to EMC 5.3−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.1 Shielding 5.3−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.2 Mains connection, DC supply 5.3−1 . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.3 Motor cable 5.3−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.4 Control cables 5.3−3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.5 Installation in the control cabinet 5.3−4 . . . . . . . . . . . . . . . . . . . . . .
5.3.6 Wiring outside of the control cabinet 5.3−5 . . . . . . . . . . . . . . . . . . .
5.3.7 Detecting and eliminating EMC interferences 5.3−6 . . . . . . . . . . . .