Lenze EVF9333−xV - Manual (Page 80)

Wiring of the standard device
Contents
5
l
5−2 EDSVF9333V EN 6.2−04/2012
5.6 Standard devices in the power range of 55 kW 5.6−1 . . . . . . . . . . . . . . . . . . .
5.6.1 Wiring according to EMC (CE−typical drive system) 5.6−1 . . . . . . . .
5.6.2 Important notes 5.6−3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.6.3 Mains connection, DC supply 5.6−4 . . . . . . . . . . . . . . . . . . . . . . . . . .
5.6.4 Mains connection: Fuses and cable cross−sections 5.6−5 . . . . . . . .
5.6.5 Mains choke/mains filter assignment 5.6−6 . . . . . . . . . . . . . . . . . .
5.6.6 Motor connection 5.6−7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.7 Standard devices in the power range 75 ... 90 kW 5.7−1 . . . . . . . . . . . . . . . .
5.7.1 Wiring according to EMC (CE−typical drive system) 5.7−1 . . . . . . . .
5.7.2 Important notes 5.7−3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.7.3 Mains connection, DC supply 5.7−4 . . . . . . . . . . . . . . . . . . . . . . . . . .
5.7.4 Mains connection: Fuses and cable cross−sections 5.7−5 . . . . . . . .
5.7.5 Mains choke/mains filter assignment 5.7−6 . . . . . . . . . . . . . . . . . .
5.7.6 Motor connection 5.7−7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.8 Control terminals 5.8−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.8.1 Important notes 5.8−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.8.2 Connection terminal of the control card 5.8−3 . . . . . . . . . . . . . . . . .
5.8.3 Device variant without "Safe torque off" function 5.8−4 . . . . . . . .
5.8.4 Device variant with "Safe torque off" function 5.8−5 . . . . . . . . . . .
5.8.5 Terminal assignment 5.8−8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.9 Wiring of the system bus (CAN) 5.9−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.10 Wiring of the feedback system 5.10−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.10.1 Important notes 5.10−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.10.2 Incremental encoder with TTL level at X8 5.10−2 . . . . . . . . . . . . . . . .
5.10.3 Incremental encoder with HTL level at X9 5.10−3 . . . . . . . . . . . . . . .
5.11 Wiring of digital frequency input / digital frequency output 5.11−1 . . . . . .
5.12 Communication modules 5.12−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .